Daily Archives: November 22, 2017

Archive of posts published in the specified Day


Factors That Determine the Size of Business

At one point we may want to determine the size of business. This helps in knowing whether it’s growing or not. Also you ascertain the size of your business in order to plan its various aspects and requirements such as manpower, raw materials, machinery etc. Once you know the size of your firm, then you’re able to determine if it’s efficiency or not efficiency. A business can be small, medium or large size.

Every business is striving towards attaining the optimum size. What is an optimum size of a business? The optimum size is when the firm has reached its maximum efficiency. At this stage the average cost per unit of the firm is at its lowest. It is at this point that the size of the firm should not be changed i.e. increased or lowered. Usually, any business starts as a small entity and then during its operating period, it expands till it reaches the optimum size.

There are two main things that will make the firm to either attain the optimum size or not to attain it. The two things are:

1.) The kind of decision the management makes.

2.) Competition.

Eight Factors that Determine the Size of Business

There are a number of factors that you can consider in measuring the size of a business. The following are some of the factors:

1.) Total Assets

The total assets of any business determine its size. The value of all assets (current and fixed) are used in measuring the size of a firm. By comparing the total value of assets between two firms that are in the same industry doesn’t always reveal the size.

2.) Power Used

The amount of power used can be used to determine the size of business. Don’t rely on this factor as it is inaccurate because the amount of power used by any business may be more or less due to many factors such as installment of power reduction equipments.

3.) Capital Investment Factor

The amount of capital invested by shareholders in form of share capital, reserves and surpluses (net worth) determines the size of business. You can use the amount of share capital invested to compare two businesses or more that are producing similar or differentiated products.

4.) Volume of the Output

This factor is applied on those firms that are producing homogeneous goods. It shouldn’t be used in case firms are producing variety of products.

5.) Value of Output

This is another factor that determines the size of a firm; however this method is only effective in case where firms are producing variety of products and where price levels remain constant.

6.) Capacity of Plant

It is used by firms that produce similar products.

7.) Number of Employees

The number of employees employed by any business can be used to determine its size. This is done by comparing the wages paid to employees with other businesses. This factor is used where firms produce similar goods. If you use it in comparing firms …


How to Use Laminating Machine, Preparation It is

If you already have your own laminating machine or want to open the services of photocopy and laminating, there are some things you should pay attention to before. You should note the quality of the engine, such as the quality of this best laminator for office. And most importantly, you must also understand how to use the correct laminating ply.

For users who are still unfamiliar, will usually encounter some obstacles around the results, such as lips, bulging and can severely damage the document. His intention to guard, it turns out the damage we get.

Here’s how to use a laminating machine and some things you need to drill in first, what’s that?

1.     Note the Power Source and Capacity of the Laminating Machine

Before discussing how the steps how to use the laminating machine, make sure first the required power source can be met well. In addition, it is not recommended also to use an extension cord or cable roll together other electrical devices. For example, striking a radio switch, television or athlete HP. What you need to know when the initial power of the laminating machine is expected to require about 600 watts of power. After that, the power will decrease when the heating process has stabilized again.

2.     Make Sure You Have Understood Existing Panel Functions

Generally, Laminating Machine has ON / OFF button, Forward / Reverse, a button to set the function of hot or cold, temperature setting button usually comes with thermostat meter, but some are not. This, of course, depends on the specifications and future of your laminating machine.

3.     Ensure Laminating Hand and Equipment in Clean and Dry Condition

Keep it clean and make sure the machine is dry, why? Of course not to potentially short-circuit.

4.     Prepare Laminating Plastic

Prepare plastic laminating that has size according to document size. It is also not advisable to use leftover or cut-laminate plastic.

Currently, laminating plastic is not so hard to find and the price is quite cheap. Variasanyapun quite diverse, ranging in size A4, Folio, and A3.

Once the preparation is complete, it is the time we start to stage the process how to use the right laminating machine.

5.     Do the Heating Machine

Do Heating Machine, Heating machine laminating can take approximately 5 minutes. Set the temperature to a slightly higher temperature, about 160 degrees. Wait until the indicator is green.

When the indicator light is green, lower the temperature setting to 140 degrees. At this stage, the indicator light will automatically turn off. Since the engine temperature is still above 140 degrees, the machine will stop automatically or be in top condition. After that, the light will come back after the temperature fits 140 (this figure is only limited to the picture only).

6.     Test Roll with Empty Paper

After checking the hot temperature. The trick is to run a roll on a blank paper that is still in a condition straight. Make sure the paper works properly without any obstacles …